srs PPR Series-Process monitoring systems

主要指標與說明The PPR Process Monitoring System is designed for inline process monitoring and diagnosis. Two paths are provided to the residual gas analyzer (RGA): a high conductivity path for monitoring base vacuum, and a pressure reducing path for monitoring the process at operating pressure.

PPR Vacuum Process Monitoring Systems0.01, 0.1, 1.0 or 10 Torr inlet pressure3 × 10-5 Torr-L/s flow rate2 second response time (0.1 Torr)100, 200 or 300 amu systems6 orders of magnitude dynamic rangeRGA Windows softwarePPR Vacuum Process Monitoring SystemsThe PPR Process Monitoring System is designed for inline process monitoring and diagnosis. Two paths are provided to the residual gas analyzer (RGA): a high conductivity path for monitoring base vacuum, and a pressure reducing path for monitoring the process at operating pressure. The pressure reducing path contains a micro-hole orifice which is designed to operate at one of the following pressures: 0.01, 0.1, 1 or 10 Torr. It reduces the sample pressure to the operating pressure of the RGA (about 10-6 Torr). This pressure drop is maintained by the pumping system which consists of a hybrid turbomolecular pump and a diaphragm pump. Both pumps are oil free and will not contaminate your process.The inlet assembly that attaches to your process chamber can be configured in several ways (see drawings). The system includes an RGA, by-pass valve assembly and Tee, a controller, turbo pump, diaphragm pump, and Windows software program for data acquisition and control.The software is used to operate the instrument in various modes, including analog scan, histogram mode, and pressure vs. time mode. Both Faraday cup and electron multiplier detectors are standard with the PPR system. The electron multiplier provides additional sensitivity and higher scan speeds. The PPR system is shipped compley assembled and calibrated, and is ready to attach to your vacuum process chamber.PPR Vacuum Process Monitoring SystemsPerformanceGas flow 3 × 10-5 mbar-L/s with pressure reduction inlet activeResponse time 2 seconds at 0.1 mbar inlet pressure (scales linearly with pressure)Start-up time 8 minutes nominalConnectionsInlet 2.75" CF flange, rotatable with through holesTurbo pump to controller 6 ft. cable (provided)Turbo to backing pump 6 ft. flexible hose (provided), 1/4" ID × 7/16" ODComputer interface RS-232C (28,800 baud, 9-pin D connector)Software RGA Windows application

PumpsHigh vacuum Hybrid turbomolecular/drag pump, 70 L/s, ultimate pressure 2 × 10-9 mbarBacking Diaphragm pump with ultimate pressure less than 1 mbar. Protection class IP44Cooling Requires forced air coolingGeneralPower requirements 110 VAC @ 60 Hz, 220 VAC @ 50 Hz (not field selectable), 300 WDimensions Vary with configuration (see sample configurations)Weight 16 lbs. (turbo pump, by-pass valve and Tee, RGA)33 lbs. (diaphragm pump and controller)Warranty One year parts and labor on defects in material or workmanship. Pump seals and diaphragm warranted for 90 days.

深圳市美佳特科技有限公司（簡稱“美佳特"）成立于2010年，致力于光通訊測試、通用電子測量及5G測試服務。美佳特以“無線溝通，溝通無極限 "企業使命，業務聚焦于精密測試測量儀器的租賃、銷售、維護、計量及測試環境搭建等一站式服務。srs PPR Process monitoring systems 測試

主營產品：示波器主機和模塊、眼圖儀、光譜儀、信號源、頻譜分析儀、網絡分析儀、阻抗分析儀、光通信儀器、誤碼儀、光時域反射儀、可調諧激光源、光功率計、光衰減器等。合作品牌：安捷倫、是德、泰克、安立、愛得萬、安騰、力科、馬可尼（IFR）、R&S、EXFO等。srs PPR Process monitoring systems 測試

主推：Agilent 86100D/C 示波器,keysight M8195A 任意波形發生器,Anritsu MS9740B/A 光譜分析儀,YOKOGAWA AQ6370D/E 光譜分析儀,keysight N1092A/C 采樣示波器,keysight E8257D 模擬信號發生器,keysight E5071C 矢量網絡分析儀